Getting started. Saving images. Customizing your camcorder. Digital 4K Video. Camera Recorder. Since then, Sony's HDV June Colorimetric and Data for this addendum is taken from a short examination of one production model of the Sony Z1E HDV camcorder and from the manual In this manual, names of screens and menus displayed on the computer screen, as well as names of buttons and terminals on the product, etc.
The DXA-4P is identical in features but designed for a perfect fit on the. Canon GL1 or GL2. These adapters are designed to easily attach balanced or unbalanced type microphones to your camcorder. Apr 8, NP FP NPF A pe rture. A da ptor ca ble ja ck. This product is subject to the terms and conditions of a software license agreement provided with the software. The product may only be used in accordance with the license agreement.
Documentation Feedback. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors.
Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. Unleaded solder Boards requiring use of unleaded solder are printed with the lead- free mark LF indicating the solder contains no lead. Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.
Unleaded solder has the following characteristics. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to about Caution: The printed pattern copper foil may peel away if the heated tip is applied for too long, so be careful!
Unleaded solder is more viscous sticky, less prone to flow than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.
Battery Pack Insert a cassette into the camcorder. The date and time is not set up in the default setting. To set the date and time, see page The pictures are recorded in the HDV format in the default setting. To record in the DV format, see page Large eyecup 1 To attach it to your camcorder, see page The CHG charge lamp lights up and charging starts. After charging the battery The CHG charge lamp turns off when the battery is fully charged. This position saves battery power. In that case, charge the rechargeable button-type battery p.
This may cause a malfunction of your camcorder. Turn on your camcorder. Open the LCD panel and adjust the angle. Press MENU. Press MENU to hide the menu screen. Getting started Page Recording The HDV format lamp lights up and your camcorder is set to recording standby the default setting. It takes some time for your camcorder to be set to recording standby.
Select the recording format. To record in the HDV format Page Recording In Mirror Mode You can also utilize this function when recording yourself, or to keep the attention of small children attracted to the camcorder while you record them. Up to about degrees Open the LCD panel degrees, then rotate it towards the subject until it clicks.
Page Displaying The Recording Setup Information - Status Check Displaying the recording setup information — Status check You can check the setup value of the following items in the standby mode or during recording. Page Adjusting The Exposure Adjusting the exposure The exposure is adjusted automatically in the default setting.
If you want to record brighter or darker pictures than those of the auto exposure adjustment, use the manual adjustment function p. In this case, use the preset or automatic white balance. To use the preset white balance Page Adjusting The Iris Adjusting the iris You can manually adjust the light volume entering the lens. As the iris is opened smaller aperture values , the light volume increases.
The range of focus narrows and only the subject appears in sharp focus. As the iris is closed larger aperture values , the light volume decreases and the range of focus widens. Press GAIN. The current gain value appears. Set the GAIN switch to the desired position. Manual focusing with your camcorder attached to a tripod is recommended.
Page Displaying The Zebra Pattern To Adjust The Brightness Displaying the zebra pattern to adjust the brightness If there is a part of the screen where brightness is over a certain level, the part may appear excessively white when played back.
By displaying the zebra pattern on such a part, you can be reminded to adjust the brightness before recording. Page Adjusting The Focus Adjusting the focus The focus is adjusted automatically in the default setting. Adjusting the focus manually You can adjust the focus manually according to the recording conditions. Use this function in the following cases.
If you release the button, the setting returns to manual focusing. Use this function to shift the focus from one subject to another. The scenes will transition smoothly. At the default setting, [PP1] through [PP6] are registered with picture quality settings for the following recording conditions.
Page Recording A Picture Using Various Features Recording a picture using various features Developing scenes smoothly — Shot transition You can register the settings of focus, zoom, iris, gain, shutter speed, and white balance, and then change the recording setting from the current one to the registered one, resulting in a smooth transition of scenes Shot transition. Press the button A or B in which the desired setting was stored. Pictures will be recorded with the settings that were changed automatically from the current ones to the stored ones.
Refer to the operating instructions supplied with your TV as well. The last few seconds of the most recently recorded scene are played back. Then, your camcorder is set to the standby mode. Page Playback LP B Remaining battery C Tape transport indicator D Time code hour: minute: second: frame or tape counter hour: minute: second The time code of this camcorder is of the drop-frame system.
Each time you press the button, the If you record the picture without setting the clock, [ -- ] and [] will appear. Refer to the operating manual supplied with the TV for the details. When your TV is monaural When your
0コメント