If you encounter any resistance, do not force the copper clip 3 , see FAQ's. Why won't the cartridge clip fit properly in the valve body or around my Moen cartridge? Use the twisting tool by applying pressure to push the cartridge 1 completely into the valve body 4.
The plastic tabs on the cartridge 1 must be flush with the valve body 4 and the plastic tabs on the cartridge 1 must be centered on the cut outs on the valve body 4. On most faucets when you move the faucet handle to the left, you will get hot water. If you move the faucet handle to the right, you will get cold water.
This is a function of the cartridge stem. If the hot and cold are reversed, rotate the stem of the cartridge 1 degrees. For additional information on Moen products visit solutions. The guide will contain repair details, troubleshooting and specific information on assembling handles associated with that style of product. Non US? Moen Canada Other International Sites.
The is a water flow cartridge built in directly below the faucet handle and controls both volume and temperature. It is commonly used in Moen single handle faucets produced prior to date varies based on style and model. Removing The Cartridge 1. Note: The copper clip 1 could be installed from the front or the back of the faucet. Gently slide the copper clip 1 back into the brass valve body 2 on top of the cartridge 3. If you encounter any resistance, do not force the copper clip 1.
The cartridge 3 may not be properly aligned. For additional details on how to align the cartridge 3 , see article Cartridge: Kitchen Faucet.
If the copper clip 1 cannot be installed for any reason or appears to be damaged or broken, the water cannot be turned back on to the faucet until the copper clip 1 is replaced. For additional information on Moen products visit solutions.
0コメント